Power on the WIFI router and connect to the Internet cable in WAN Port and connect your PC or laptop to LAN port and check the IP Gateway, Open the browser and give the gateway IP on menu bar you will get username and password prompt give the username and password( it will available on wifi manual page). Follow with below steps for network configure.
DHCP Config:
1. Open Internet settings(WAN) select DHCP mode. In this it will take the IP from WAN and it will give us the Internet Login Page.
PPPoE Config:
1. Open Internet settings(WAN) select PPPoE mode. In this it will take the IP from WAN when your user details are correct.
2. Enter the User ID and Password Which is provided by Local Provider.
3. Check the status in your device is this taken IP or not.
Wireless configuration:
2G Wireless Configuration:
1. Enable SSID Broadcast.
2. Give the SSID ( which name want to show the WIFI name)
3. Mode: 802.11n
4. Channel: 1,6,11.
5. Band Width: 20M/40M.
6. Security : WPA-PSK/WPA2-PSK AES
5G Wireless Configuration:
1. Enable SSID Broadcast.
2. Give the SSID ( which name want to show the WIFI name)
3. Mode: 802.11ac.
4. Channel: 30,36,153,40.
5. Band Width: 20M/40M/80M.
6. Security : WPA-PSK/WPA2-PSK AES
For Changing Router Admin Password:
1. Go to maintenance
2. Open Admin option.
3. Select the ADMIN If first time give the new password, If need to change enter old password and new password.